Applied logo3

Top Banner 728x90 2 27 17 5.00 less

Automotive Applications

Energy Release Antifriction Engine Treatment

ERPHOTO

A 16 fl. oz. Bottle of ER Treats Your Entire* Vehicle:

  • Engine

  • Transmission

  • Power Steering

  • Differential

  • * Based Upon 5 Quart Crankcase

70 Chevelle SS396Muscle Cars are a significant investment and they sit idle for long periods of time. Adding Energy Release helps prevent cold-start abrasion, oxidation, rust and corrosion for year- around protection. ER helps eliminate oil related catastrophic failures caused by lubrication break down.


From The Extremes Of Racing To Everyday Driving,

Energy Release Products Perform, Protect and Extend The Life of Your Vehicle.

Sammy Hero Card 2 14 HiRes 1 jpg 381x305Sammy Swindell

ERLOGO

“I use Energy Release in all my vehicles.
My personal ones, my racing ones, and my
toys. Energy Release helps us to finish
races and run up front.”

Sammy Swindell
3‐Time World of Outlaws National Champion


Energy Release Has Been Tested And Proven Since 1985

ENERGY RELEASE - NEW IMPROVED FORMULA!

BUY HERE!

The Energy Release Chemists have been busy...they enhanced the antifriction properties of Energy Release by 40%! The New Formula offers improved anti-wear & extreme pressure performance. The improved formla is compatible with all engine oil grades, including low viscosity 0w20 Oils. The improved formula has superior thermal stability and resists thickening at low temperatures and prevents breadown and shearing, which degrades lubricity. The New Energy Release Formula has advanced anti-corrosive and anti-oxidation propoerties to prevent the buildup of sludge. Energy Rlease Products Advanced Formula is slightly more transparent in apperaance and less viscous.

Note: Energy Release Antifriction Engine Treatment IS NOT an oil treatment. The oil is a carrier for ER in the engine to points of friction, heat generation and wear. ER is activated by heat & friction and treats those areas directly.

What is Energy Release?

Energy Release (ER) is a liquid chemical formula designed to be added to your existing oil to improve and protect moving metal parts. ER is activated by heat and friction to protect against wear created by the moving parts in your engine. ER is not a typical oil additive but the first “true” and “original” Antifriction Metal Conditioner. ER significantly smoothes rough metal surfaces by modify- ing the first few microns of the surfaces. The metal surfaces treated with ER are resistant to abrasion, oxidation, rust and corrosion for year-around protection. Energy Release has a definite residual effect on treated surfaces, even if the surface is dry after treat- ment. This unique chemical process results in stronger and smoother metal parts.

Antifriction

Product Information:

  • Energy Release is not a lubricant. ER IS NOT an oil treatment. Teh oil is a carrier for ER in the engine to points of friction, heat generation and wear.

  • Energy Release is 100% Pure Concentrate.

  • Energy Release treats your entire vehicle.

  • Energy Release does not contain PTFE, Moly, graphite, lead, zinc, metals or fillers.

  • Energy Release is designed to be carried by existing fluids: motor oil, transmission oil and gear lube.

  • Energy Release can be used in every lubricated system of your vehicle.

  • Energy Release treats metal surfaces in a time-temperature-pressure relationship. The higher the temperature or pressure, the shorter the time it takes to condition metal parts.

  • Energy Release is nonflammable, nontoxic and environmentally friendly.

  • Energy Release has a definite residual effect on treated surfaces, even if the surface is dry after treatment.



Energy Release (ER) is the Only Oil Additive

That Can Be Used in Every Lubricated System of Your Vehicle

2006 Chevrolet Impala SS LS4 engine

Engine

ER treats internal engine
components and helps eliminate oil
related catastrophic failures caused
by lubrication break down.

536px-Tapered-roller-bearing din720 ex

Bearings

ER G-200 Grease treats the
bearing surfaces and protects
against dust, dirt and little
particles of metal.

Automatic transmission cut

Automatic Transmission

ER treats the gears and components
in an automatic transmission.

power steering-parts

Power Steering

ER treats the pump, rack-and-pinion
gearset, and cylinder/piston.

Turbocharger-1-

Turbocharger

ER treats the bearing system
of the center hub rotating
assembly.

800px-Differentialgetriebe2

Differential

ER treats all the gears in a differential:
ring gear, pinion, planet gear, etc.

 


What Are Some of The Benefits of Using Energy Release?

Many vehicles sit idle for long periods of time...Mother Nature takes its toll on them. The combustion process in an engine forms acids which are highly corrosive when the vapors condense. These acids collect in the upper cylinder areas where their temperature is raised above their dew point. The acids condense and etch the cylinder walls and piston rings, which accounts for engine wear. Cold starts are also harmful to the internal engine components because abrasion occurs. Moisture build-up, in the lubricated components of the equipment, causes corrosion and component failure.

Energy Release is activated by heat and pressure to protect against wear created by the moving parts in your engine and equipment. The metal conditioning technology of Energy Release leaves a residual effect...surfaces treated with ER are resistant to abrasion, oxidation, rust and corrosion for year-around protection.

combustionEnergy Release Engine Treatment Conditions The Metal

When Friction and Wear are Reduced in a Gasoline
and Diesel Engine any of the Following May Occur:

  • Reduced Operating Temperatures

  • Easier Cold-starts

  • Extended Oil Life

  • Increased Performance

  • Improved Combustion Efficiency

  • Increased Fuel Economy

  • Quieter Operation

  • Reduced Oil Consumption

  • Prolonged Vehicle Life

Energy Release Has A Significant Effect On Gasoline And Diesel Engines

Gasoline and Diesel engines provide power to the world. They provide power to cars, trucks, ships and boats, construction and min- ing machines and much more...they also take a beating. Engines are a significant investment. Engine lubrication is perhaps the single most important element of a good maintenance program. Engine oil lubricates moving parts; it provides corrosion protection; it absorbs and neutralizes contaminant; it serves as a coolant; and it is a sealant. Fuel efficiency is also a major consideration, especially with the energy conservation of the world's petroleum supplies (fuel savings is only a small portion of the true value of using Energy Release). Adding Energy Release to gasoline and diesel engines helps eliminate oil related catastrophic failures caused by lubrication break down.

800px-4 0 L V8 AuroraAdding Energy Release helps eliminate oil related catastrophic failures caused by lubrication break down and improves fuel mileage. 240good-bgglow 721px-Cummins EngineDiesel Engines are a significant investment. Adding Energy Release helps eliminate oil related catastrophic failures caused by lubrication break down. ER also extends the life of a Turbocharger.

How Energy Release Affects Metal Surfaces

The enclosed series of four photographs dramatically show the effect which Energy Release has upon ferrous based metal surfac- es treated by the product in friction producing conditions. The photos are exact reproductions of research done at Boise State University through and electron microscope of the “silver bullet” bearing surface used in the “friction brake” machine test.

Energy Release is activated by heat and pressure to protect against wear created by the moving parts in your engine and equipment. The metal conditioning technology of Energy Release leaves a residual effect without changing tolerances...surfaces treated with ER are resistant to abrasion, oxidation, rust and corrosion for year-around protection.

How Energy Release Affects Metal Surfaces

Surface Effects

Energy Release Antifriction Metal Conditioner treats the irregular, pitted
surface of the metal whose “roughness” is a primary cause of the friction
between the metal surfaces. These “hills and valleys” when moving in
direct contact with each other, produce friction which results in heat and
accelerated wear.

Electron Microscope Photo - Raw Untreated Roller Bearing Electron Microscope Photo -  High Grade Motor Oil Electron Microscope Photo - High Grade Motor Oil and ER   Electro Microscope - ER Alone

Photo #1

Untreated Roller Bearing
Magnified 290 Times


Photo #2

Same Roller Bearing
Subjected to Brake Testing
Using High Grade 30 Weight Oil

 
 

Photo #3

Same Roller Bearing
Subjected to Brake Testing

Using High Grade 30 Weight Oil
and Energy Release


Photo #4

Same Roller Bearing
Subjected to Brake Testing
Using 100% Energy Release

 

 

Friction is Reduced Dramatically
When the Surface is Modified by the Addition of Energy Release.


When energy Release is carried to heat and pressure points wherever there is friction, the polishing effect caused by Energy Release modifying the surface (without changing tolerances) of the metal as shown in the series of photographs, releases the machinery to work smoother, freer and cooler, thus, reducing energy consumption and extending the life of the components.

Heat is generally a result of friction and resistance to motion in machinery. This is why it is important during testing to measure the temperature before and after adding Energy Release, as well as measuring energy consumption. A reduction in heat will eventually lower energy consumption and reduce costs in addition to extending machinery life.


Products That Perform

Energy Release Antifriction Metal Conditioner

Antifriction Rockcrawling

Directions:

Engine/Crankcase
Crankcase: (16:1) 2 oz. per quart of oil initially.
Subsequent applications—1 oz. per quart.

Fuel (2-cycle): (64:1) 1/2 oz. per quart of 2-cycle oil

(mix thoroughly) before mixing with gasoline.

Power Steering
(32:1) 1 oz. per quart

Differentials
Up to 80wt. Oil: (16:1) 2 oz. per quart . Over 80wt.

Oil: (8:1) 4 oz. per quart.

Transmissions
Automatic: (64:1) 1/2 oz. per quart.
Manual: (16:1) 2 oz. per quart.

Note: DO NOT use ER in posi-track or
limited slip differentials.

 

ER Treats Your Entire Vehicle

ER is 100% Pure Concentrate

ER is Not Diluted With Oil

ER Has Been Tested and Proven for Over 20 Years

Energy Release Motor Flush

MotorFlush As sludge builds in an engine, normal engine operations
become more stressful on engine parts. Sludge build-up
around the valve train in the cylinder head diminishes the
ability for valves to open and close properly. Sludge buildup
around timing chain assemblies interferes with oil flow to
critical parts and contributes to early timing chain failure.
Sludge build-up in the oil pan interferes with the oil pump’s
ability to keep the oil moving through the system.
Energy Release Motor Flush thoroughly cleans and conditions the
engine’s internal components to dissolve and eliminate
sludge, gum and varnish buildup. Cleaner valves, rings and
oil passages improve horsepower and fuel economy. The
ER Antifriction Engine Treatment protects and conditions
metal surfaces during the cleaning process resulting in
reduced friction and increased performance.

  • Use Before Changing Oil to Clean Engine and
    Oil Pan of Sludge, Gum and Varnish Build-up.

  • Contains Energy Release Antifriction Metal
    Conditioner to Protect and Condition Metal
    Surfaces During the Cleaning Process.
800px-4 0 L V8 AuroraOil sludge buildup has always been a problem for automobile engines. The severe service that engines are exposed to in high-speed driving and idling in heavy traffic increases the tendency for sludge to buildup. Using Energy Release Motor Flush immediately before changing the oil helps to dissolve and eliminate sludge, gum and varnish buildup.

 


Energy Release Penetrating Lube

PenetratingLube

ER Multipurpose Penetrating Lube incorporates the metal
conditioning technology of ER in a convenient spray form.
It works well in high heat applications where ordinary lubri-
cants typically evaporate or burn away. ER Multipurpose
Penetrating Lube guards against rust on exposed surfac-
es, frees bolts and fitting frozen by rust or corrosion and is
an excellent antioxidant.

  • Frees Bolts and Fittings Frozen by Rust or Corrosion

  • Excellent Antioxidant

rusty bolt 01 0510-lgThe exceptional effect of ER Penetrating Lube allows it to work directly into the rust by capillary action. The rusted bolt assembly can be easily dismantled after allowing 1-2 minutes penetration time.

Energy Release Cutting and Tapping Fluid

CuttingTappingFluid

ER Cutting and Tapping Fluid is a superior cutting formula containing ER
which can be applied with ease. ER Cutting and Tapping Fluid incorpo-
rates ER to help tools cut through the hardest metals without distortion
and tool wear. The fluid reduces heat and clings to tool surfaces providing
superior protection to cutters, drills, taps, reamers and punches. ER Cutting
and Tapping Fluid is recommended for use on stainless steel, high nickel
alloys and exotic alloys such as Titanium, Hastelloy X, Inconel and Askoloy.

  • Incorporates ER to Cut Through Hard Metals

  • Provides Superior Protection

  • Protects Cutters, Drills, Taps, Reamer and Punches

  • Extends Tool Life

hss TapsToday’s machine shops are diverse and specialized. ER Cutting & Tapping Fluid is very effective in cutting through the hardest metals without distortion and tool wear.

Energy Release MuddOFF

MuddOFF

MuddOFF is a ready to use,
breakthrough product in non-
stick technology. MuddOFF
creates a shield that keeps
mud, bugs, tar and other
heavy debris from sticking.

MudOFFADUse MuddOFF anywhere buildup of mud, dirt, bugs tar or sticky materials is undesirable. Make sure surfaces are clean and dry before applying. Allow MuddOFF to turn clear before exposing to recrea- tional elements. Just spray equipment with a garden hose and debris will wash away.

 

 

Energy Release Gear & Chain Clear Grease

GearChainGrease

ER Gear & Chain Clear grease combines a high quality
soluble grease with ER to form a protective barrier against
moisture and extreme temperature swings. It sprays on
thin to penetrate the link pins and tacks up in seconds for
superior adherence
. ER Gear & Chain Clear Grease helps
to reduce overall wear and prevents rust and corrosion
form forming on exposed surfaces. It is recommended for
all types of gears, chains and hinge pins.

Energy Release bicycle chain grease extends the life of

bicycle chain and bicycle derailleur gears

 

  • Sprays On Thin To Penetrate Link Pins and Bushings

  • Tacks Up in Seconds For Superior Adherence

  • Combined With ER, Prevents Rust and Corrosion

  • Open Gears and Chain; Bicycle Chain

  • Conveyor Chain

  • Hinge Pins

495px-Shimano xt rear derailleurEnergy Release Gear & Chain Clear Grease is very effective in treating bicycle chain and derailleur gears. It sprays on thin to penetrate the link pins and tacks up in seconds for superior adherence.


Energy Release G-200 Synthetic Grease

G200TubSpicer Universal Joint Division of Dana Corporation has approved Energy Release G-200 High- Temperature Grease as having met 2006-J specification for High-Temperature Lubricant. G-200 High-Temperature Grease Benefits

  • Heat Resistant, Melting-point above 550° F

  • Resistant to Oxidation, Rust and Corrosion

  • Adhesive; Clings to Moving Parts

  • Distinct Color for Easy Identification

  • High Film Strength

  • Resists Severe Loads

  • Non-melting

  • Resists Water

536px-Tapered-roller-bearing din720 exER reduces friction in Timken Tapered Roller Bearings for efficiency, to reduce wear and to facilitate extended use at high speeds.


Energy Release Citrus Engine Degreaser Plus

CitrusEngineDegreaser ER Citrus Engine Degreaser Plus is a versatile cleaner/
degreaser that can be used as a tough engine degreaser
or a gentle all purpose cleaner. The citrus-based formula
is safe to use on auto parts, tools, machinery and concrete
as well as stainless steel and plastic. The product is
free of petroleum distillates and is environmentally friendly.
This product rinses completely with water leaving no residue.

  • Gentle All Purpose Cleaner

  • Citrus-based Formula

  • Safe Tools, Concrete, Stainless Steel and Plastics

  • Free of Petroleum Distillates

  • Environmentally Friendly

240px-OrangeBloss wbEnergy Release Citrus Degreaser Plus is made with a natural citrus solvent that cuts through the toughest grease, dirt and grime. ER Citrus Degreaser is great for cleaning in the home, garage, shop and office.

 

Fuel System Cleaner

Rapid Cleanup Diesel and Gasoline Supplements

Energy Release Fuel Conditioners and Cleaners rapidly treat engine deposits if fuel metering system components (port and throttle body fuel in‐ jectors or carburetor idle air bleeds and throttle bodies), in the intake manifold, ports and values. Removal of these intake system deposits can improve drivability, increase fuel economy, restore power and reduce exhaust emissions.

Energy Releases Fuel System Cleaners can also reduce engine knock and run‐on by removing combustion chamber deposits and lowering engine octane requirements. Benefits will vary with engine design and operating severity.

Energy Release Complete Fuel System Cleaner

CompleteFuelSystemCleaner ER Complete Fuel System Cleaner is a highly concentrated
deposit control system developed for today’s high performance
gasoline engines. It cleans harmful deposits, reduces emissions
and restores power and performance.

  • Removes Combustion, Injector, & Valve Deposits

  • Cleans Carburetors

  • Restores Performance

  • Reduces Emissions

  • One 16 fl. oz. Bottle Treats 16 Gallons of Gasoline

combustionComplete Fuel System Cleaner is highly concentrated to remove intake valve combustion chamber deposits.


Energy Release Fuel Injector Cleaner

FuelSystemCleaner ER Fuel Injector Cleaner removes and prevents fuel
system deposit buildup, keeps fuel injectors and
carburetor clean and restores lost fuel efficiency.

  • Cleans Fuel Injectors & Carburetors

  • Increases Performance

  • Smoothes Rough Idle

  • Keeps Injectors Clean

  • One 16 fl. oz. Bottle Treats 16 Gallons of Fuel

800px-Injector3Fuel Injector Cleaner is formulated to maintain and control deposits, gum and varnish in the entire fuel system.

Energy Release Diesel Fuel System Conditioner

DieselFuelSystemCleaner

ER Diesel Fuel System Conditioner removes harmful
deposits left as a combustion by-product. One bottle
treats up to100 gallon and works to clean dirty injectors,
prevents corrosion and improves fuel lubricity.

  • Cleans Dirty Injectors

  • Passes Cummins L-10 Injector Test

  • Controls Water Pickup

  • Improves Fuel Lubricity

  • Removes Deposits and Prevents Corrosion

  • One 16 fl. oz. Bottle Treats Up to 100 Gallons of Fuel

Mobil gas station in Belmont CaliforniaThe quality of available diesel fuels varies considerably, depending on the base ingredient in the diesel. Poor quality diesel can decrease fuel efficiency, increase pollution and damage engines. ER Diesel Fuel System Conditioner cleans and maintains your fuel system.